A steel quill stem for use with a threaded steerer. The handlebar clamp is 1-inch (25.4mm) diameter. The quill stem is marked 22.2 mm diameter and is compatible
with a 1-inch steerer tube (7/8 ID) Top of the blue tape marks the minimum insertion as
indicated on the stem. The fwd extension is a little over 3 inches, angle from the stem is 115
degrees. Still fully usable but cosmetically has some chrome loss.
There is a larger loss area on the stem from being inside the steerer, but that
is below the min insertion so it would not be visible.
Returns Accepted for this item if it's within 14 Days